Abstract:
ABSTRACT
Purpose: To analyse the strength of materials by means of optimization, find the best value
of the strength test of mutually influential materials with a variation of roll-hoop height.
Design/methodology/approach: The research began with the design of a three dimensional model by varying the height of the roll-hoop on chassis types: A, B, C, D, E, F,
G, H ,and I. The height of the main roll hoop at each chassis is: 502, 504, 506 508, 510, 512,
514, 516 and 518 mm. Then by using the student version of Autodesk Inventor, a simulation
is made to test: Deflection, Normal stress, Shear stress (T-x / T-y) and Torsional stress. The
results of this test are used to analyse the types of chassis that have been designed so that
the best chassis design is obtained.
Findings: The results obtained in this study are the value of Normal stress decreases with
increasing roll-hoop height, and applies inversely to the torsional stress value. Deflection
values tend to be stable with increasing roll-hoop height, while Shear stress T-x and T-y
values tend to fluctuate.
Research limitations/implications: The chassis material uses carbon steel which has
mechanical property values in accordance with 2015 FSAE Standard regulations.
Practical implications: The optimization results of the design of the roll hoop height
on the chassis show that the chassis type B with the main roll hoop height of 504 mm is
the best with the lowest deflection value and the difference in tension according to the
FSAE rules.
Originality/value: The research that has been done only tests the strength of the
ingredients separately. In this study trying to analyse the strength of the material by way of
optimization to find the best value from the strength test of material that influence each other
with a variation of roll-hoop height.
Keywords: Student formula car, Autodesk Inventor, Roll-hoop play, Normal stress,
Torsional stress
