Abstract:
Clean water treatment with membrane technology is a water treatment process with very good quality and suitable for drinking water treatment in developing countries because the membrane has a lot of advantages. One type of membrane separation operation is with ultrafiltration membranes. Ultrafiltration is a process of filtering particles in the size range of colloids, namely liquid while large molecules detained on the surface of the membrane and the solute with very small size can pass through the membrane. The purpose of this study was to determine the best composition of %wt of
dimethylformamide in the manufacture of ultrafiltration membranes. Ultrafiltration membrane is made by varying the concentration of the additive of dimethylformamide which serves for the determination of membrane pore size and the concentration of acetone. Mixing materials done by stirring for ± 6 hours, polymer film printouts is coagulated for 1 hour in ice water (± 4 °C) and then washed with running water and stored in a container containing formalin. Then conducted testing on the membrane using peat water where permeate that generated is measured the volume of each interval of 5 minutes to determine the membrane flux. Then analyzing the concentration of permeate to determine the coefficient of rejection, where the expected rejection is> 90%. Based on the research results, the best ultrafiltration membrane was membrane with composition wt% of dimethylformamide of 20; 24 and 28, where rejection coefficient average respectively was 98.15; 92.80 and 95.41%.
