Abstract:
Main purpose of this final task is to design a wood cutter machine for channel saw on
the wood board and to get the final result like a work sheet and to determine the
machine component of the wood cutter until it’s proper to built. This design of the
modification wood cutter machine has some concept with some steps like: need,
problem analysis and product specification, product concept design, analysis
technique, modeling and the work sheet. the next process is build the wood cutter
machine that has been planned. The final task result is a design that poured in the
work sheet include the framework machine drawing, liner drawing, arm connector
drawing, arm knife drawing, pen drawing, pivot transmission drawing, pivot eccentric
drawing, circle eccentric drawing, puli and workspace drawing. The wood cutter
capacity saw could reach 2 cm thickness. The machine booster resources is an
electricity engine with 0.25 HP power. The wood cutter from modification product
dimension length x wide x height that 350 x 350 x 910 mm. the machine framework
material use an iron steel profile L 30 x 30 x 2 mm material St 42. The transmission
pivot made from St 37 with dimension O 15 mm and 300 mm length. The transmission
system use belt component V and two pair of Puli 1,5’’ and 3.5’’, work base board use
Plywood. The final result of this design and the wood cutter making then will be built
adjust the work sheet.
