Repo Dosen ULM

PENGARUH JARAK ANTAR ELEKTRODA PLAT STAINLESS STEEL TERHADAP PRODUKTIFITAS DAN EFISIENSI GENERATOR HHO MENGGUNAKAN METODE ELEKTROLISIS AIR SUMUR DENGAN KATALIS NaHCO3

Show simple item record

dc.contributor.author Sahwan, Khairul
dc.contributor.author Tamjidillah, Mastiadi
dc.date.accessioned 2023-05-15T23:14:14Z
dc.date.available 2023-05-15T23:14:14Z
dc.date.issued 2020-12-15
dc.identifier.issn 2745-6331
dc.identifier.uri https://repo-dosen.ulm.ac.id//handle/123456789/31084
dc.description turnitin en_US
dc.description.abstract Abstract HHO gas is an alternative energy that can replace fossil energy sources. HHO gas can be produced in several ways including water electrolysis. In this study the researchers used the electrolysis method of well water using NaHCO3 catalyst in this study. The researchers used variations in the distance between the wheels, namely 2mm, 4mm, and 6mm. From the research, it was concluded that the time needed to produce HHO gas in the first 50 was the fastest at a distance of 2 mm, which is 95 seconds. While at the latest at a distance of 6 mm, 123 seconds. HHO gas flow rate at a distance of 2 mm is greater than the flow rate at a distance of 4 mm and a distance of 6 mm. The smaller the distance between plates, the faster the HHO gas will be generated. Which is used during the electrolysis process, where the lower voltage is obtained with a distance of 6 mm which is 3.4 volts while the lowest current is obtained at a distance of 2 mm which is 4.25 amperes. The lowest electrical energy is obtained at a distance of 2 mm ie 50 ml starting using energy of 1266.35 joules From several factors that affect the efficiency of the HHO generator, the highest efficiency is found at a distance of 2 mm, which is an average of 37.90% and the lowest efficiency at a distance of 6 mm, which is 20.58%, so that the efficiency is obtained plate 2 mm. Keywords: HHO, Electrolysis, Efficiency Gas en_US
dc.publisher Program Studi Teknik Mesin Fakultas Teknik Universitas Lambung Mangkurat en_US
dc.relation.ispartofseries 2;2
dc.subject Research Subject Categories::TECHNOLOGY en_US
dc.title PENGARUH JARAK ANTAR ELEKTRODA PLAT STAINLESS STEEL TERHADAP PRODUKTIFITAS DAN EFISIENSI GENERATOR HHO MENGGUNAKAN METODE ELEKTROLISIS AIR SUMUR DENGAN KATALIS NaHCO3 en_US
dc.type Other en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account