Repo Dosen ULM

Characteristic of Raw Water Sources and Analysis of The Mixing Process Process With Parameter Design in Clean Water Pump Istallations

Show simple item record

dc.contributor.author Tamjidillah, Mastiadi
dc.contributor.author Nizar Ramadhan, Muhammad
dc.contributor.author Farouk Setiawan, Muhammad
dc.contributor.author Iberahim, Jerry
dc.date.accessioned 2023-05-09T23:38:51Z
dc.date.available 2023-05-09T23:38:51Z
dc.date.issued 2021-10-29
dc.identifier.issn 1729-3774
dc.identifier.uri https://repo-dosen.ulm.ac.id//handle/123456789/30549
dc.description corresponding en_US
dc.description.abstract The quality characteristics of raw water sources in the regional integrated drinking water supply system (SPAM) of Banjarbakula were investigated and found to main tain the supply of drinking water quantity and quality in accordance with drinking water standards. The optimum model for the mixing process of raw water and poly alumi num chloride (PAC) and pump stroke for the input of water sources from rivers to obtain a composition setting that is in accordance with the raw water sources of each region in the region was selected and determined. So the optimum parameter setting model between alum water, raw water and pump stroke for each raw water source is known and is regionally integrated as a result of a comprehensive study. The integration of Taguchi parameter design and response surface can complement each other and become two methods that go hand in hand in the process of opti mizing clean water products. Parameter design provides a very practical optimization step, the basis for this forma tion refers to the factorial fractional experimental design. However, the absence of statistical assumptions that fol low the stages of analysis makes this method widely cho sen by researchers and practitioners. With the experi mental design of the raw water mixing process, turbidity such as 5 lt/sec, 10 lt/sec, 15 lt/sec, 20 lt/sec and 25 lt/sec and % PAC concentration 5 ppm, 10 ppm, 15 ppm, 20 ppm and 25 ppm with a pump installation stroke of 5 %, 10 %, 15 %, 20 % and 25 % were used. In the process of add ing PAC, always pay attention and observe the behav ior of the attractive force of the floating particles (flock). The particles were then subjected to SEM (scanning elec tron microscopy) to determine the dimensions of the flock grains deposited Keywords: characteristics, parameters, setting, sup ply, turbidity, mixing, concentration, pump, behavior, clean water en_US
dc.language.iso en en_US
dc.publisher Eastern-European Journal of Enterprise Technologies en_US
dc.relation.ispartofseries 113;5/10
dc.subject 120370 en_US
dc.title Characteristic of Raw Water Sources and Analysis of The Mixing Process Process With Parameter Design in Clean Water Pump Istallations en_US
dc.type Other en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account