Ansys Modelling Behaviour Of The Reinforced Concrete Beam With The Effect Of Various Reinforcement Type And Concrete Strength

Abstract

The failure behavior of reinforced concrete beam structural elements was modeled using computer software, ANSYS, to create the study presented in this paper. This study's goal was to ascertain how lower concrete and steel quality affected the way single reinforced concrete beam structural parts failed under tensile failure conditions. In this investigation, eight specimens of a straightforward 200x400x3000 mm with 2D16 single-reinforced beam have been modeled. A concentrated load will be applied to the beam in the middle of the beam span until it is collapsed. According to the study's findings, the quality of steel does not significantly change when the ultimate load is a flexural crack, and neither does the quality of concrete, which results in a smaller flexural capacity but a larger deflection. The crack pattern is also not significantly affected by this change. According to SNI 2847:2019, the flexural capacity of the ANSYS software analysis is comparable to the simplified calculation analysis, with a discrepancy of adequately reasonable. It is advisable for the low concrete steam rength beam with a low grade of reinforcement, whilst the higher concrete strength by using high-grade rebar.