Implementation Peat Soil Adsorbent & Variation Of Filter For Reduce Emission Improvement From Motor Vehicle

Abstract

The use of fossil fuels in transportation equipment, especially motorized vehicles, will have an extraordinary

effect on air pollution. Therefore, air pollution becomes very important problem today. The amount of percentage of air pollution from transportation sources in Indonesia is 70.5 % CO, 18.34 % HC, 8.89 % NOx, 0.88 % SOx, and 1.33 % particulate matter. Given the danger of exhaust emissions, especially carbon monoxide which can cause death for humans who inhale it,

therefore efforts are needed to control air pollution from

motorized vehicles. There are several methods that can

be

used, one of which is to use adsorbents. Activated carbon can be used as an adsorbent. One alternative that can be applied as an adsorbent is peat soil-activated

carbon which is abundant and easy to make as an adsorbent. By utilizing the abundant peat-soil which is a great potential area of Banjarmasin, South Kalimantan. In this experimental study; model l has a diameter of 20 mm, model 2 has an outside diameter of 20 mm and an inside diameter of 10 mm, and model 3 is without adsorbent. The length of this model is the same. Testing with

a

2005 Honda Kharisma motor vehicle with an engine speed of 1000, 2000, and 3000 rpm. CO and HC emission tests using a gas analyzer were carried out. Testing was also carried out using a dyno test to determine the engine performance of a motorcycle that was installed with an adsorbent on the exhaust gas. The results showed that peat soil adsorbents with perforated circle designs can reduce CO gas emissions by 55 % compared to the others.

Besides that, the use of peat soil adsorbents with hollow circle designs can also reduce HC gas emissions by 3.51 %. The results of the engine performance test showed that there was no significant effect of using this adsorbent on torque and power.In conclusion, peat soil adsorbents used to reduce exhaust emissions in motorized vehicles can be applied