Peer Review-Modelling Study of Flue Gas Flow Pattern With Pressure, Amount and Shape Variation Catalytic Converter

Abstract

The purpose of this study is to analyse the modelling of exhaust gas flow patterns with variations in pressure, number, and shape of filters on the catalytic converter. The research method used is a simulation using ANSYS, which starts by creating a converter catalytic model with pressure variations: (0.5-1.5 atm), number of filters: (2-5), and the form of filter-cut/filter-not-cut. The decrease in velocity is caused by non-uniform velocity in the exhaust gas flow that occurs when passing through a bend in the filter-cut that serves as a directional flow to create turbulence. Filter-cut type tends to have fluctuating pressure, turbulence flow pattern shape so that contact between filter and exhaust gas is more effective. Based on the analysis of flow patterns, the speed and pressure of the 5 filter-not-cut design at a pressure of 0.5 are the best, while at pressure (1-1.5 atm) the type 5 filter-cut is the best. This study is limited to filter-not-cut and filter-cut types with variations in the number of filters: 2, 3, 4, and 5, and the inlet pressure between 0.5-1 atm. The practical implications of this study are to find a catalytic converter design that has advantages in the effectiveness of exhaust gas absorption. The results show that the filter-not-cut and filter-cut types have the best effectiveness in the number of 5 filters. Filter-not-cut at the pressure of 0.5 atm and filter-cut at pressure (1-1.5 atm).