Repo Dosen ULM

The effect of pure temperature and pressure on alloy hardness of Al-6.7% Cu using squeeze casting method

Show simple item record

dc.contributor.author Siswanto, Rudi
dc.contributor.author Ma'ruf
dc.contributor.author Mukti, Adi Marhadi
dc.contributor.author Subagyo, Rachmat
dc.date.accessioned 2022-03-09T03:44:23Z
dc.date.available 2022-03-09T03:44:23Z
dc.date.issued 2020-10
dc.identifier.uri https://repo-dosen.ulm.ac.id//handle/123456789/23000
dc.description.abstract Squeeze casting is done by combining the casting and forging processes. . The metal solidification process is carried out in a metal mold by pressing it with hydraulic pressure. This study aims to determine the effect of pouring temperature and pressure on the hardness value of the squeeze casting of Al-6.7% Cu alloy material. The process is that the material is melted using a crucible furnace until it melts then poured with a temperature variation of 710 ° C, 730 ° C and 750 ° C. Then it is poured into a metal mold that is heated to a temperature of 250 ° C and then pressed for 60 seconds with variations of 0 MPa, 2.5 MPa, 5 MPa and 7.5 MPa. The test results show that; (1) the higher the pouring temperature, the lower the hardness value, (2) the higher the pressure, the higher the hardness value. (3) The highest hardness value was at pouring temperature of 710 ° C with a pressure of 7.5 Mpa (59 HB) while the lowest hardness value was at pouring temperature of 750 ° C with a pressure of 0 Mpa (34 HB) en_US
dc.publisher Mechanical Engineering Universitas Brawijaya Malang en_US
dc.subject squeeze casting, pressure, pouring temperature, and hardness value en_US
dc.title The effect of pure temperature and pressure on alloy hardness of Al-6.7% Cu using squeeze casting method en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account